Conduit fill calculator

Conduit fill from the conductor and conduit diameters you enter, checked against the 53/31/40 per cent fill limits, with conduit, couplings, connectors and wire for the takeoff.

Your job

Overall diameter of one insulated conductor, from the cable or wire datasheet. Not supplied by this calculator. 0 means not entered yet.

Internal diameter of the conduit you will use, from the conduit spec sheet or the manufacturer. 0 means not entered yet.

Count every conductor that goes in the conduit, bonding conductors included. This sets the fill limit: 53% for one, 31% for two, 40% for three or more.

The size you will buy. It is not checked against the diameter above, so enter the internal diameter of this size.

Copper wire for the takeoff. It does not change the fill, which comes from the outside diameter above.

Answer

Result
Enter the diameters
Fill
not worked out (limit 40%)
Conductor area
n/a
Allowed area in this conduit
n/a
Smallest internal diameter for these conductors
n/a
Most conductors of this size that fit
n/a
Couplings and connectors
4 couplings, 2 connectors
  • No pass or fail is shown yet. Enter the conductor outside diameter and the conduit internal diameter from the datasheets.

Method: Fill limits as a share of the conduit cross-section: 53% for one conductor, 31% for two, 40% for three or more (summary of the CEC conduit fill rule); Areas are computed from the diameters you enter: area = pi/4 x diameter squared. No conductor or conduit dimension table is built in; Couplings every 3 m (10 ft) and two connectors per run are estimating assumptions; Check against the CEC edition and amendments your province adopts; confirm with the authority having jurisdiction.

Estimating aid based on a summary of the CEC. Provinces adopt different editions and amendments. Confirm with the authority having jurisdiction, and the engineer of record where one is involved.

Priced takeoff

  • EMT conduit 1/2 in$47.5515 m at $3.171.8 h
  • EMT set-screw coupling 1/2 in$2.404 ea at $0.600.24 h
  • EMT set-screw connector 1/2 in$0.982 ea at $0.490.12 h
  • RW90 stranded copper building wire 12 AWG$64.2060 m at $1.070.84 h
Materials
$115.13
Labour, 3 h at $99.00
$297.00
Your cost, before markup and tax
$412.13

Reference prices are dated baselines (2026-11) for Ontario. Confirm them with your supplier. In TradeQuote PRO your own saved prices replace these.

How it works

You enter 8 inputs. The calculator returns the quantities, rounds them up the way the material is sold, and lists the takeoff so it can be priced.

  • Conductor outside diameter (mm). Overall diameter of one insulated conductor, from the cable or wire datasheet. Not supplied by this calculator. 0 means not entered yet.
  • Conduit internal diameter (mm). Internal diameter of the conduit you will use, from the conduit spec sheet or the manufacturer. 0 means not entered yet.
  • Number of conductors. Count every conductor that goes in the conduit, bonding conductors included. This sets the fill limit: 53% for one, 31% for two, 40% for three or more.
  • Conduit type for pricing.
  • Trade size for pricing. The size you will buy. It is not checked against the diameter above, so enter the internal diameter of this size.
  • Conductor size for pricing. Copper wire for the takeoff. It does not change the fill, which comes from the outside diameter above.
  • Run length (m).
  • Identical runs.

The method

  • Fill limits as a share of the conduit cross-section: 53% for one conductor, 31% for two, 40% for three or more (summary of the CEC conduit fill rule)
  • Areas are computed from the diameters you enter: area = pi/4 x diameter squared. No conductor or conduit dimension table is built in
  • Couplings every 3 m (10 ft) and two connectors per run are estimating assumptions
  • Check against the CEC edition and amendments your province adopts; confirm with the authority having jurisdiction.

Check results against the code and manufacturer data that apply to your job. Prices are dated baselines to confirm with a supplier.

Add this to a real estimate in TradeQuote PRO

The takeoff lands as estimate lines with your prices, markup and tax, then becomes a proposal the client signs.

Start free trial

More electrical calculators