Water heater sizing calculator
First-hour rating and tank size from occupants and fixtures, or the tankless flow in GPM at the local incoming water temperature.
Your job
Answer
- Tank size
- 30 gal gas (first-hour rating 59 gal)
- Peak-hour demand
- 50 gal (189 L)
- Tankless flow needed
- 5.5 GPM (20.8 L/min)
- Tankless flow available
- 4.8 GPM from a 199,000 BTU/h unit
- Temperature rise
- 44 °C (79 °F) from 5 °C incoming
- Tank recovery
- 38 gal per hour
- A 199,000 BTU/h tankless gives 4.8 GPM at this temperature rise, less than the 5.5 GPM needed. Fit 2 units, or reduce what runs at once.
- Tankless gas units often need a larger gas line (3/4 in or more) and venting; add that to the quote.
- Rise is 44 °C: 49 °C at the tap less 5 °C incoming. Store tanks at 60 °C or above and temper the outlet where required by the plumbing code.
Method: First-hour rating = 0.7 x tank volume + recovery per hour; peak-hour demand from occupants and fixtures (rule of thumb of the ASHRAE and DOE method); Tankless capacity: GPM = BTU/h x efficiency / (500 x rise in °F); 500 = 8.34 lb/gal x 60 min; Incoming water temperatures are typical coldest-season values; National Plumbing Code of Canada governs temperature controls
Estimating aid based on a summary of the CEC. Provinces adopt different editions and amendments. Confirm with the authority having jurisdiction, and the engineer of record where one is involved.
Priced takeoff
- Water heater, gas, 40 gal$1,008.991 ea at $1,008.993 h
- Materials
- $1,008.99
- Labour, 3 h at $95.00
- $285.00
- Your cost, before markup and tax
- $1,293.99
Reference prices are dated baselines (2026-11) for Ontario. Confirm them with your supplier. In TradeQuote PRO your own saved prices replace these.
How it works
You enter 11 inputs. The calculator returns the quantities, rounds them up the way the material is sold, and lists the takeoff so it can be priced.
- Heater type for the quote.
- Occupants.
- Bathrooms.
- Large soaker tub.
- Dishwasher.
- Clothes washer on hot.
- Fuel.
- Location (incoming water).
- Measured incoming water temperature (0 = use the city) (°C).
- Showers running at once (tankless).
- Kitchen sink at the same time (tankless).
The method
- First-hour rating = 0.7 x tank volume + recovery per hour; peak-hour demand from occupants and fixtures (rule of thumb of the ASHRAE and DOE method)
- Tankless capacity: GPM = BTU/h x efficiency / (500 x rise in °F); 500 = 8.34 lb/gal x 60 min
- Incoming water temperatures are typical coldest-season values; National Plumbing Code of Canada governs temperature controls
Check results against the code and manufacturer data that apply to your job. Prices are dated baselines to confirm with a supplier.
Add this to a real estimate in TradeQuote PRO
The takeoff lands as estimate lines with your prices, markup and tax, then becomes a proposal the client signs.